Huomaa: Tämä verkkosivusto sisältää esteettömyysjärjestelmän. Paina Control-F11 säätääksesi verkkosivuston näkövammaisille, jotka käyttävät näytönlukijaa; Avaa esteettömyysvalikko painamalla Control-F10.

Power switch/speaker installation movie - ThinkStation D10,D20

Power switch/speaker installation movie - ThinkStation D10,D20

Power switch/speaker installation movie - ThinkStation D10,D20

GotoMovie player help

Text of the audio portion of this movie
  1. To replace the power switch/speaker assembly, slide the assembly into position until it snaps into place and connect the power cable.
  2. Route the cable assembly through the cable trough and connect it.
  3. To replace the hard disk drive fan, first replace the fan into its housing by pushing the rubber mounts into the holes and pulling them through to the other side.
  4. Next, guide the fan cable into the notch as shown and connect it to the systemboard.
  5. Put the fan into position until the two hinge tabs are in place.
  6. Rotate the fan until the latch snaps into place.
  7. To replace the cover, position the cover into its guide rail and press down to snap it into position.
  8. If necessary, put the key into the lock and turn it to the locked position.
Additional information

GotoThinkStation movie index

Full service video CD available from http://www.lenovoservicetraining.com/

 

Purchase parts online

Alias-tunnus:MIGR-73555
Asiakirjan tunnus:PD010072
Alkuperäinen julkaisupäivä:01/04/2011
Viimeisin muokattu päivämäärä:07/31/2014