PC Support

Wireless LAN Card replacement - ThinkPad T440, T440s, T450, T450s

Wireless LAN Card replacement - ThinkPad T440, T440s, T450, T450s

Wireless LAN Card replacement - ThinkPad T440, T440s, T450, T450s

  1. Disconnect the AC Adapter from the computer.
  2. Power on the system and continuously tap F1 to enter the BIOS.
  3. If you receive a general help window, press enter to continue.
  4. Use the right arrow key to select the configuration menu.
  5. Use the down arrow key to highlight power menu, and press enter.
  6. The power sub menu will be displayed.
  7. Use the down arrow keys to highlight the disable built in battery option, and press enter.
  8. Assure that yes is highlighted and press enter again to power off the system.
  9. Allow your system three to five minutes to cool before you open up the cover.
  10. Place the unit upside down.
  11. Slide the External Battery lock to the unlocked position.
  12. Slide and hold the External Battery release latch to the open position.
  13. Slide the External Battery out of the chassis.
  14. Turn the system over.
  15. Insert a straightened paper clip into the release hole of the SIM card tray.
  16. Pull the tray from the slot and leave it out until servicing is complete.
  17. Place the unit upside down.
  18. Loosen the eight captive screws that secure the base cover.
  19. Use a plastic pry tool to disconnect the clips along the rear of the cover.
  20. Then continue prying along the edges.
    Warning: make sure not to damage any ports or boards.
  21. Lift the front of the base cover to pivot it free of the securing clips.
  22. Disconnect the power cable from the system board.
  23. Disconnect the two antenna cables.
  24. Remove the single retaining screw to raise the card.
  25. Pull the wireless LAN card from the connection.
  26. Insert the wireless LAN card into the connection.
  27. Install the single retaining screw.
  28. Connect the grey antenna cable to the jack labeled Main.
  29. Connect the black antenna cable to the jack labeled Auxiliary.
  30. Connect the power cable to the system board.
  31. Align the base cover with the ports of the system.
  32. Press along the edges to secure the locking clips.
  33. Make sure the cover is seated correctly.
  34. Tighten eight captive screws.
  35. Turn the system over.
  36. Insert the tray into the slot until it clicks into place.
  37. Place the unit upside down.
  38. Align the External Battery with the battery bay.
  39. Slide it into position until it latches.
  40. Connect the AC adapter to the system.
  41. Turn on the computer to automatically enable the internal battery.
文件ID:VID100568
初始发布日期:09/29/2015
最近修改日期:09/29/2015
X

联想使用Cookie来改善您的体验。

请访问我们的Cookie同意工具管理您的偏好，或访问我们的隐私政策以了解详细信息。

返回上一页
X
lenovo

我们收集的关于您的信息

我们希望对我们和我们的合作伙伴收集的数据以及我们如何使用这些数据保持透明，这样您就可以最好地控制您的个人数据。有关详细信息，请参阅我们的隐私政策。

我们的cookie同意工具为您提供了更好的可见性和控制您的偏好在网站上的存储方式。然而，一些第三方cookie已被暂时归类为必需的，这意味着一些cookie将被丢弃，而这些cookie实际上对网站的运行是不必要的。我们正在努力解决这个问题，但您仍然可以通过浏览器工具阻止基本cookie。

合作伙伴收集的信息

我们使用以下合作伙伴来更好地改善您的整体网络浏览体验。他们使用cookie和其他机制将您与您的社交网络联系起来，并根据您的兴趣定制广告。您可以通过取消勾选下面的框来选择退出此信息收集。

类别
允许1的1
Essential 必填

我们依靠cookie、javascript和其他web技术来提供网站上的关键或基本元素。这可能包括您的语言偏好或基于服务器的cookie，以保持我们的网站运行和运营。如果禁用，您的网站体验可能会受到影响。

Analytics

我们使用分析来改进我们的网站，更好地了解用户访问网站的频率、访问最多的页面以及在我们网站上花费的时间。我们将依靠cookie和第三方合作伙伴来跟踪这些活动和行为。单击其中一个合作伙伴名称以了解更多信息。

供应商
名称 必填

网站:

如他们所说

这家公司收集什么数据？

收集的数据

匿名的:

假名的:

PII:

敏感的:

数据共享

数据保留

数据使用

数据存储

Adobe