Intel Management Engine 11.8.70.3626 Firmware for Windows 7 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit) - Miix 520-12IKB

• Miix 520-12IKB (Type 20M3, 20M4, 81CG)

• Microsoft Windows 7 (64-bit), Windows 8.1 (64-bit), Windows 10 (64-bit)

Important Information

• Before updating to this firmware, if you are using Intel Active Management Technology, Intel Small Business Technology, or Intel Standard Manageability, you should first provision your system by downloading and following the instructions available on the link below:

https://downloadcenter.intel.com/search?keyword=unprovisioning%20tool

• *If these technologies are not configured on your system, you can disregard the information.
• *After provision and MEFW update, you can then re-provision your system.

Note:

• If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section.
• Confirm first with your IT administrator if updating the Management Engine firmware is necessary.
• Prior to the firmware update, connect the AC adapter and fully charged battery (if applicable) to the system.
• Downgrading the Management Engine firmware to an older version cannot be allowed.
• Silent installation is not supported.

Make sure the following device is installed in the Device Manager

• In the System devices category,
• Intel(R) Management Engine Interface

If not exists, install the following software:

• Intel Management Engine 11.8 Software

Summary of Changes

11.8.70.3626

[Fixed]

1. Intel release 2019 Q2 security issue

Please refer to the README file (content in English) for the following:

• Installation Instructions
• Determining Which Version is Installed
• A complete list of summary of changes
• Known limitations (if any)