• Input voltage: 90 to 264 V ac
• Frequency: 50/60
• Power consumption:
  • Maximum: 23 watts
  • Typical: 16 watts typical*
  • Standby: <1 watt
  • Suspend: <1 watt
  • Off: <0.5 watt
  • Maximum earth leakage current:
    • < 3.5 mA at 264 V
    • < 0.25 mA at 100 V

* Typical power consumption is tested under normal EPA4.1 standard.

Declared acoustical noise emissions LWAU = 4.5 bels or less. The noise emission level stated is the declared (upper limit) A-weighted sound power level, in bels, for a random sample of monitors. All measurements are made in accordance with ANSI S12.10 and reported in conformance with ISO/DIS 7779.

• One monitor
• Attached 1.8-meter (5.9-foot) analog video signal cable (15-pin D to 15-pin D)
• 1.8-meter (5.9-foot) DVI-D video signal cable
• Power cord
• A 3 -> 2 pin AC adapter (Japan only)
• A Japanese proof of purchase card (Japan only)
• CD containing multilingual user's guide, setup test pattern, and .INF file
• Setup poster
• Safety, troubleshooting, and warranty guide

Note: With the exception of the models for U.S., Canada, and Japan, the power cords (based on the country order code) are supplied by distribution centers.

Three years - Customer Carry-in or Mail-in using Rapid Replacement Service

• Announce date: 17 Sep 2008 (Worldwide)
• Planned availability date: 19 Sep 2008 (Asia Pacific)
• Planned availability date: 10 Oct 2008 (Canada, Europe/Middle East/Africa, Latin America, United States)

• Microsoft Windows Vista
• Microsoft Windows XP

• TCO'03 Environmental Label
• MPRII
• ISO/DIS 13406 Part 2
• Software: Microsoft 2000/XP
• EU Directive 2002/96/EC - WEEE
• EU Directive 2002/95/EC - RoHS
• China RoHS
• EPA
• GS

UL (U.S.), CSA (Canada), IEC950 CB Report, NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV (Germany), TUV-S (Argentina), CCC (Mainland China), NOM (Mexico), SASO (Saudi Arabia), GOST (Russia), PSB (Singapore), JEITA (Japan), FCC B (U.S.), IC (Canada), CE (Europe), MIC (Korea), VCCI Class B (Japan), BSMI (Taiwan Region), New Zealand, Jordan

• Supported display modes are a function of the attaching system unit and video subsystem. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, video adapter cards, and application software.
• Horizontal- and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.
• Adjustment of the user controls to enlarge the image to its maximum size requires that the signal timings of the display mode being used fall within the monitor-timing specifications.
• The number of colors shown in any display mode (up to a maximum of 16.7 million) is not limited by the monitor, but depends on the capabilities of the video adapter in the system unit.
• This monitor provides FCC class B - residential installation - compliance in all display modes.
• Implementation of monitor power management follows the VESA DPMS standard. This standard must also be implemented in the attaching system unit hardware and software for monitor power management to be effective. The system implementation must provide user-adjustable, power-down delay periods. The monitor power management function is invoked only after appropriate signals are received from an attached system unit or video adapter.
• Implementation of monitor Plug-And-Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software for monitor Plug-And-Play to be effective.
• Certain functions require the system unit to be similarly configured, so all monitor functions may not be enabled when attached to a particular system unit.
• A 19.0-inch Wide TFT monitor has nearly 4.0 million subpixel transistors laid over an area exceeding 162 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. This monitor meets the ISO 13406-2 Class II Pixel Defect.